• Extremely flexible, modular system architecture. Completely field configurable and upgradeable.
• Support for up to 2 precision, dual float magnetostrictive level probes.
• Provisions for monitoring up to 8 intrinsically safe discrete sensor inputs, including discriminating and non-discriminating interstitial, overfill, and secondary leak containment sensors. Sensor wiring fault detection feature ensures correct installation when used with Pneumercator "F" series fault output discrete sensors.
• Basic configuration includes 2 relays and 2 contact closure inputs. Optionally expandable to a total of 10 relays and 10 contact closure inputs OR 18 relays.
• Optionally expandable to 6 or 12 channel analog outputs.

• Third party certified for 0.1 and 0.2 gph in-tank leak detection in tanks up to 75,000 gallons.
• Optional internal impact printer for automatic or on-demand reports. Outdoor printer option available.
• Remotely monitor and program via an included RS-232 serial port, from a central location via optional, secured, internal modem, or from a LAN/WAN via optional, secured, internal network interface card. RS-485 port included for connection to Pneumercator "smart" peripherals, such as remote display and annunciator panels.
• Log reports include: Automatic shift inventory, unsupervised deliveries, bulk sales, alarms, leak test, water removal, product ordering, and theft logging.
• NEMA 4/4X enclosure options available for harsh or outdoor environments.

TMS2000

• First

  , it's simple to use. Everyone in your organization will be able to get the information they need at the push of a button.

• Second

  , it's sophisticated. You can get all the information you need, in the form you need, when you need it.

• Third

  , the

  TMS2000

   was developed by the best experts in the inventory measurement and management industry, with the future in mind.

• 0.2 gph monthly testing.
• 0.1 gph precision test.
• 0.2 gph quick test in as little as 2 hours.
• Perform 0.1 gph or 0.2 gph tests with as little as 20% of tank capacity.
• Magnetostrictive level probe and intrinsically safe (IS) discrete sensor capacities; 2 probes with 8 leak sensors.
• Fault detection capable leak sensor inputs using Pneumercator "F" series discrete sensors.
• RS-232 serial port standard. Optional secured, internal modem, Fax/modem, 10/100 network interface card, or Modbus RTU. RS-485 peripheral bus standard.
• 2 fully programmable 10 amp 120 VAC relay output contacts and 2 dry contact inputs standard. Optional card provides additional 4 relay contacts, and 4 dry contact inputs, OR 8 relay contacts, and 8 dry contact inputs, OR 16 relay outputs.
• Optional card provides 6 or 12 analog output channels.
• Real-time clock and log memory with battery back-up; Configuration data maintained in EEPROM.
• Superbright, sunlight-readable LED display with discrete LED annunciators for 5 alarm conditions; Leak, Setpoint 1, Setpoint 2, Setpoint 3 and Water.

• Automatic logging of shift inventory, unsupervised deliveries, bulk sales, alarms, leak test, water removal, product ordering, and thefts.
• Access real-time logged and configuration data via RS-232 or modem port using Windows 2000 through Windows 10 compatible TMSCOMM software.
• Automatic and manual hardcopy reports via optional internal printer. Outdoor printer option available.
• Volumetric computations for steel and fiberglass tanks, including manifolded tanks and irregular geometries.
• System configuration can be performed at the site, or remotely via the serial, modem communications port, or network interface.
• "Black box" configuration available for ultra low-cost applications where serial, modem communications, or LAN/WAN are used for collecting acquisition and log data; remote sites or SIR.
• Locking NEMA 12 enclosure standard, optional NEMA 4 or 4X available.
• Back-up generator and oil/water separator applications supported.
• UL approved, file #E139464; CSA approval pending.
• 110/220 VAC operation. DC Input options available.